Global Graphics

Beleggen, aandelen kopen in België, informatie, koersen en analyses



Filantroop
Forum elite
Forum elite
Berichten: 3280
Lid geworden op: 13 nov 2013 11:29
waarderingen: 693

Re: Global Graphics

Bericht door Filantroop »

R10 schreef:
05 jun 2021 13:37
Zeer interessant interview met GVDS in nieuwste VFB magazine van juni
Paar punten:
- liquiditeit verhogen dr overnames met aandelen te betalen, evt liquiditeitsverschaffer ook
- in gesprek met KBC sec vr opvolging aandeel
- id toekomst wilt hij ook naar nasdaq, naast enxt BXL
- ...en nog meer interessants te lezen in VFB magazine

Van gierige Guido nr ambitieuze/open Guido ;)
Klinkt allemaal heel mooi R10!
Voor mij is er evenwel NOOIT een zogenaamde 'gierige' Guido geweest maar eerder een heel klad ongeduldige 'beleggers'...



Gebruikersavatar
Lieve16
Premiummember
Premiummember
Berichten: 5229
Lid geworden op: 02 jan 2012 22:29
waarderingen: 4760

Re: Global Graphics

Bericht door Lieve16 »

Guido is volgens mij iemand die volop gaat voor eigen gewin en daarbij niemand ontziet !

serie 1
Forum actieveling
Forum actieveling
Berichten: 394
Lid geworden op: 18 mei 2018 10:55
waarderingen: 75

Re: Global Graphics

Bericht door serie 1 »

:up:

R10
Forum gebruiker
Forum gebruiker
Berichten: 142
Lid geworden op: 27 sep 2012 12:35
waarderingen: 77

Re: Global Graphics

Bericht door R10 »

K/w schreef:
05 jun 2021 14:26
Zéér opvallend hoe ze het geweer van schouder hebben veranderd?
Misschien ziet hij (ook vr zichzelf) toch meer brood id Nasdaq beursgang als die er komt?

Vraag is ook, speelt het West-Vlaamse koppel Hubert Sigiez en Christel Lootens nog een rol (achter de schermen)?

https://www.tijd.be/markten-live/nieuws ... n/10094921

Boeiend om volgen alleszins

Gebruikersavatar
K/w
Premiummember
Premiummember
Berichten: 3256
Lid geworden op: 01 jul 2013 20:41
waarderingen: 1247

Re: Global Graphics

Bericht door K/w »

R10 schreef:
07 jun 2021 17:29
Vraag is ook, speelt het West-Vlaamse koppel Hubert Sigiez en Christel Lootens nog een rol (achter de schermen)?
Ik vrees ervoor, denk dat ze beiden net zoveel in de pap te brokkelen hebben als ons?!


Deze twee hadden samen 1.78 % van het totaal aantal aandelen, maar in februari 2021 zijn deze opgesplitst in 2:
SIGIEZ HUBERT 0.89 %
LOOTENS CHRISTEL 0.89 %
Waarschijnlijk omdat ze dan geen meldingsplicht meer hebben?

FRIBERG CHRISTIAN heeft nog 1.16 % of 381.732 stuks van het totale aantal.
Wees hebzuchtig als de markt angstig is en
wees angstig als de markt hebberig is.

mulder
Forum veteraan
Forum veteraan
Berichten: 1608
Lid geworden op: 04 feb 2019 17:52
waarderingen: 244

Re: Global Graphics

Bericht door mulder »

Lieve16 schreef:
05 jun 2021 17:28
Guido is volgens mij iemand die volop gaat voor eigen gewin en daarbij niemand ontziet !
Zo zijn we toch allemaal?

Gebruikersavatar
Lieve16
Premiummember
Premiummember
Berichten: 5229
Lid geworden op: 02 jan 2012 22:29
waarderingen: 4760

Re: Global Graphics

Bericht door Lieve16 »

mulder schreef:
07 jun 2021 18:30
Lieve16 schreef:
05 jun 2021 17:28
Guido is volgens mij iemand die volop gaat voor eigen gewin en daarbij niemand ontziet !
Zo zijn we toch allemaal?
Ik vind wel dat bij Guido de nodige nuances ontbreken.☑️
Umi liked last!

Gebruikersavatar
K/w
Premiummember
Premiummember
Berichten: 3256
Lid geworden op: 01 jul 2013 20:41
waarderingen: 1247

XAAR Nitrox

Bericht door K/w »

Partners support Xaar Nitrox launch
09 June 2021
https://www.dlpmag.com/news/42979/partn ... ox-launch/



Xaar has received support for the launch its new Nitrox printhead with immediate availability software and electronics, designed to minimise the time required for its integration by OEMs.

Specifically, Meteor Inkjet and Global Inkjet Systems (GIS) are offering a selection of driver electronics, software and tools to ensure that OEMs and integrators can maximise the impact of the printhead, and minimise their time to market when launching new printers.

With firing frequencies of up to 48kHz, and print speeds exceeding 100m/min, the Xaar Nitrox printhead is designed to suit an ever-widening range of uses. This is aided by Xaar having worked closely with its partners to make sure that ‘plug in and print’ support is available for OEMs.

Graham Tweedale, general manager of Xaar’s printhead business unit, explained, ‘The support and collaboration of key software suppliers such as GIS and Meteor, has ensured that OEMs from almost any sector will immediately be able to explore and reap the rewards from Nitrox’s enhanced performance and productivity.’

With the Xaar Nitrox offering an array of enhanced capabilities and market applications, both Meteor and GIS have ensured their solutions fully underpin these.

Meteor Inkjet managing director Clive Ayling said, ‘Since 2008, Meteor has worked with Xaar to offer customers scalable and reliable printhead driving solutions. Supporting all versions of the Nitrox printhead, our powerful, production-ready electronics and comprehensive suite of software ensures OEMs can be up-and-running quickly, while taking full advantage of the Nitrox high-laydown, high-speed technology in a wide variety of applications.’

Nick Geddes, GIS managing director, said, ‘Our latest driver electronics will fully enable the cutting-edge capabilities of this new printhead, and this, alongside the ability of our ink supply system to support the potential high flow rates, will enable OEMs to gain maximum productivity.’
R10 liked last!
Wees hebzuchtig als de markt angstig is en
wees angstig als de markt hebberig is.

Gebruikersavatar
K/w
Premiummember
Premiummember
Berichten: 3256
Lid geworden op: 01 jul 2013 20:41
waarderingen: 1247

LabelStream 4000 Series UV inkjet press

Bericht door K/w »

Front-End option for Canon LabelStream 4000 series
25/05/2021
https://www.hybridsoftware.com/press-me ... 00-series/





Canon confirms Rodden as ANZ distributor
10 June 2021


Canon Production Printing has signed an agreement with Rodden Graphics to further the presence of the LabelStream 4000 Series UV inkjet press in Australia and New Zealand.

As of the beginning of May 2021, Rodden Graphics is promoting and distributing the press. Canon Production Printing Australia will continue to support the installation and servicing of LabelStream presses across Australia and New Zealand.

The agreement between Canon Production Printing and Rodden Graphics comes on the back of the identification of a ‘significant requirement’ in the region for digital label printing, driven by an increasing demand for manufacturing flexibility, on-demand production, high quality and reliable output. Further, through the arrangement Canon Production Printing is set to continue and solidify the expansion of its successful presence in Europe to the Oceania label printing market.

Craig Nethercott, managing director at Canon Production Printing Oceania, said, ‘We’re confident that we can assist label converters looking to extend profit streams via digital print solutions. To support this growth, the LabelStream 4000 series will be available in both its Core solution, providing the ideal introduction into the world of high-performance inkjet label printing, as well as hybrid configuration, enabling a complete inline production of high-quality, self-adhesive labels and a fully integrated, single-pass label conversion line.’

Walter Vogelsberger, vice president of digital packaging print at Canon Production Printing, added, ‘With its strong channel presence and established relationships, Rodden Graphics is a trusted partner for its many customers and will be able to increase the value it adds by offering the Canon Production Printing solutions to the Oceania label market.’

Rodden Graphics director James Rodden commented, ‘We are pleased to partner with Canon and support its distribution for the Oceania market. We are confident that our network will play a key role in growing the presence of the LabelStream 4000 series and in introducing its product portfolio to an increasing customer base in our region.’

Mr Vogelsberger added, ‘Australia is an important market in terms of growth opportunities and the cooperation with Rodden Graphics is a perfect fit to provide customers with access to Canon’s cutting-edge technology supported by our excellent service network.’
Wees hebzuchtig als de markt angstig is en
wees angstig als de markt hebberig is.

Gebruikersavatar
K/w
Premiummember
Premiummember
Berichten: 3256
Lid geworden op: 01 jul 2013 20:41
waarderingen: 1247

We are embarking on a new chapter

Bericht door K/w »

We are embarking on a new chapter
14/06/2021
https://www.hybridsoftware.com/company/ ... w-chapter/


Discover the profitability forecast of Global Graphics, as told by our Chairman. In this next chapter, we are gearing up for growth and major transformation.

“With our expansion strategy, which is based on 75% organic growth and 25% growth through acquisitions, we aim to achieve 100 million euros in turnover and EBITDA of 30 to 35 million euros by 2026. This means quadrupling our turnover between 2020 and 2026. That said, we have already come a long way towards our goal by merging with HYBRID Software,” he adds.

We are embarking on a new chapter in our existence
Interview with Guido Van der Schueren, Chairman of the Board, Global Graphics

(Excerpt) Global Graphics, now a holding company, is comprised of Global Graphics, a developer of software solutions for digital printing, HYBRID Software, a developer of productivity tools and workflow automation software for labels and packaging, Xitron, which specialises in solutions driving industrial printheads, and finally Meteor, offering software that makes PDF content, among other formats, fit for print.

“Global Graphics merged with HYBRID Software in view of the existing synergies between our two companies,” says Van der Schueren, coming straight to the point. “This was our vision even seven years ago, and earlier this year, it finally became reality. The products developed by Global Graphics are now sold by HYBRID Software and vice-versa. We are starting to see the first effects of this new organisational structure, and by 2022, we will be able to benefit fully from the synergies it creates.”

Access the full article here
marcator liked last!
Wees hebzuchtig als de markt angstig is en
wees angstig als de markt hebberig is.









Plaats reactie